Backyard Nature Products Mini 2 Level Cascade Pond Kit - 16 Gallons
Item#: BNP013- Durable resin and fiberglass construction
- Holds 16 gallons of water
- Circulates 250 gallons per hour
- Waterproof power cord
- Pump included
- Dimensions: 56L x 24W x 8H inches
Additional features:
- Perfect for attracting birds
- Easy to install
- No plumbing needed - water circulates through the fountain
- 1 fountain rock
- 32 x 22 inch ABS molded single pool
- 24 x 17 inch molded cascade piece
- 200 GPH pump and flow control valve
- 5 feet of .5-inch ID black vinyl tubing
- Layered waterfall
- Biological clarifier
- Barley straw
- Includes an instructional DVD
The Backyard Nature Products Mini 2 Level Cascade Pond Kit keeps its waterfall strong at 250 gallons per hour. For backyards or interiors, the molded design offers easy installation into a variety of spaces. It is especially suited to the outdoors where it can attract a variety of neighborhood birds. Durable molded resin and fiberglass construction withstands even harsh weather conditions season after season. The kit comes in 2 sections. One section is 32 x 22 inches and the second section is 24 x 17 inches.
Please note for best circulation of your pond - The fountain rock shown in the alternate images, is meant to be placed at the very top of the complete set-up while the pump is placed at the very lowest point of the complete set-up. This creates the very best recirculation cycle. A .75-inch hose connects these two units together. The length of the hose can be as long as it needs to be to complete the circuit.
Dimensions
56L x 24W x 8H inches
Material
Resin & Fiberglass
Brand Name
Backyard Nature Products Inc
Type
Preformed Pond Kits
Height (in.)
8
Width (ft.)
2
Water Capacity
16 gallons
Gallons Per Hour
250
*** If the water becomes dirty and you want to put in clean water , disconnect the tubing from the Water Fall Flowmaster, and lay it away from the bath and use the pump to empty the pool out onto the adjacent ground. Then unplug the pump, and
sponge out the last of the muddy water.
* OR TO COMPLETELY CLEAN YOUR POND YOU CAN DO
THE FOLLOWING.
1. Unplug the pump, push the gravel aside off the mesh strainer, remove the strainer and pump.
2. Use a jet of water from a garden hose to wash the gravel beginning with the top cascade and working down to the
bottom pool.
3. Take a one gallon pail or equivalent sized container and dip
the muddy water out of the bottom pool and pour it on the ground.
4. Wash the gravel in the bottom pool again with the hose and
repeat dumping it out with the bucket. You can also stir the gravel by hand or with a stick to help suspend the dirt so it can be dumped out.
5. Usually 2 washings are sufficient to achieve sufficient cleanliness, but if you wish, you can do more.
6. If you suspect debris has gotten into the pump, see the pump
instructions for pump disassembly and cleaning.
7. Once complete, reinstall the pump and mesh gravel strainer,
refill with clean water and restart the pump. The water may be somewhere dingy but it should clear in an hour or two.
