Shell Wall Indoor/Outdoor Fountain
Item#: LB004Sale Price: $292.98 SAVE: $27.01 (8%)
List Price : $319.99
- Marble/resin construction
- Pump included
- Indoor or outdoor use
- Wall-mount design
- Does not absorb moisture
- No plumbing needed - water recirculates through the fountain
- Dimensions: 12L x 16W x 31.5H inches
Elegant, unique, artistically designed, and beautifully detailed, this fountain will transform your wall into a masterpiece. This fountain has 3 settings; low, medium and high. It is recommended to start on the lowest setting. This fountain is a perfect representation of a traditional English garden fountain with just enough of a modern touch. Each individually hand-crafted piece of this fountain is cast in a crushed marble/resin composition.
By using this method, each one made captures the same definition and special details as the original. This fountain can also be used outdoors due to its remarkable strength and durability. It should be completely emptied and covered below 40 degrees. The material is non-porous and does not absorb moisture, therefore it will not expand and contract the way concrete or terra cotta will. Each fountain has an inverted V hook molded into the back for easy wall-mounting.
Give your decor the sublime touch of an English garden with this fountain.
Dimensions
12L x 16W x 31.5H inches
Material
Resin & Fiberglass
Weight
32 lbs.
Brand Name
Craft-Tex
Water Sound
Medium
Light
No
Height (in.)
31.5
Finish: Choose from 7 Finish options
1.Run the plug end of the pump cord through the hole in the back of the fountain bowl. Position the pump in the very bottom of the fountain bowl. Attach the plastic tubing to the output nozzle of the pump and to the copper tubing extending into the back near the bottom of the bowl. You will need to adjust the length of the tubing to give the best performance (do not allow the tubing to crimp as it will cut off the flow of water).
2. Locate and install mounting bracket on wall with 3/4 inch angle pointing up.
3. The inverted groove in the back of the fountain slips over the mounting bracket.
4. After the fountain has been hung, add water to the bowl up to the level of the hole in the back of bowl where electrical cord comes through. Plug in the pump. The pump has three settings I, II and II with I being the lowest. We suggest you start with setting I.
Finish
Hayneedle.com response:Thank you for your review! Customer satisfaction is our top priority and we stand behind our products. We want you to be completely satisfied with your purchase. If there are any issues with the fountain upon arrival please contact our Customer Care Center where a representative will be happy to help you.